Mold Removal Tips

Mold can pose many health risks, whether you are in Nashville TN or any other area. If you’re dealing with mold, then you need to get rid of it as soon as possible. Here are a few mold removal tips to help you eliminate mold.

1. Check For Leaks In Your Plumbing
Inspect your plumbing because if there are leaks present, then this may be why you have mold. Fixing the leak could fix your mold problem. Just remember that water travels in all directions, so perform a thorough inspection of your plumbing system.

2. Use Mold Removal Spray On Surfaces
Mold removal spray does a great job at getting rid of mold on surfaces. Use the spray on walls, ceilings and floors regularly if you want to keep mold at bay. If mold continues to come back, then you’ll need to find what’s causing it and then fix the problem. However, it’s still use mold removal spray afterwards because this can prevent mold from coming back.

Alternatively, you can use a solution mix of bleach and water. Bleach is one of the most effective ways to kill mold and/or to slowdown mold growth. Here’s a tip, use bleach and water in areas where moisture tends to accumulate the most, such as the basement or the bathroom.

If you don’t want to use commercial mold spray, then use the following natural solutions:

. Vinegar
. Hydrogen peroxide
. Tea tree oil
. Water & baking soda

If the mold removal spray isn’t working, a Nashville mold removal company may be the next best option

3. Use A Dehumidifier
When moisture builds up, eventually mold can develop. A good way to remove moisture from the air is by using a dehumidifier. During the hot summer months, you’ll want to keep your dehumidifier on as often as possible. When the colder weather arrives, you can use it less frequently. However, make sure you invest in a high quality dehumidifier.

4. Vacuum Wood Surfaces
Is there mold on your wooden surfaces or wooden furniture? If so, then take a vacuum to them. Here’s a pro tip: use a small soft brush attachment because this will dust your wood surfaces and/or furniture, while at the same time remove mold spores. Also, don’t use the high setting on your vacuum. This will reduce the risk of the spores becoming airborne.

5. Look Under Easy To Miss Areas
If you spot mold on your surfaces, then remove it via some of the previously discussed methods. However, you’ll want to check easy to miss areas for mold growth. For example, look under your carpets and behind your wallpaper. Certain types of mold, such as Aureobasidium, is commonly found those areas when there has been some sort of water damage nearby, or if the carpeting is located in a darken wet area.

If you find mold under your carpets or behind your wallpaper, then remove the mold. You should consider replacing the carpets and wallpaper, too.

6. Removing Mold From Fabrics
For mold that has spread to your fabrics, you can bring your fabrics outside and remove the mold. Do this by using a brush. Next, soak your fabrics in liquid laundry detergent for amount 10 minutes before putting them in your washing machine. When finished, check to see if the mold has been removed from your fabrics. If necessary, rewash the fabrics using a color safe bleach.

To be on the safe side, you hang your clothes to air dry. If possible, place them on a clothes laden and place the laden outdoors.

All of the above tips can help you remove mold in Nashville and other areas. The best thing you can do is take precautions to prevent mold from growing in the first place. Also, when working around mold, make sure you wear gloves and an air mask.

Leave a Reply

Your email address will not be published. Required fields are marked *